added libraries and clean up

source/libraries/INPUT_74HC4051/INPUT_74HC4051.cpp

@@ -1,13 +1,18 @@
 #include "Arduino.h"
 #include "INPUT_74HC4051.h"
 
+//should be called in setup()
 void INPUT_74HC4051::begin(uint8_t analog, uint8_t s0, uint8_t s1, uint8_t s2,CallbackFunction cbF) {
+	
+	//analog pin which output Z is connected to
 	_analog = analog;
 	
+	//3 digital pins where S0,S1,S2 are connected to
 	_s0 = s0;
 	_s1 = s1;
 	_s2 = s2;
 	
+	
 	pinMode(_analog,INPUT);
 	
 	pinMode(_s0,OUTPUT);
@@ -16,8 +21,9 @@ void INPUT_74HC4051::begin(uint8_t analog, uint8_t s0, uint8_t s1, uint8_t s2,Ca
 	
 	_callbackFunction = cbF;
 	
-	//init start values
+	//initalize start values
 	uint8_t pin,r0,r1,r2;
+	//run through the 8 I/O pins
 	for (pin=0; pin<8; pin++) {
 		r0 = bitRead(pin,0);     
 		r1 = bitRead(pin,1);
@@ -30,6 +36,7 @@ void INPUT_74HC4051::begin(uint8_t analog, uint8_t s0, uint8_t s1, uint8_t s2,Ca
 	}  	
 }
 
+//should be called in loop(), read values and call callback function on change
 void INPUT_74HC4051::loop() {
 	uint8_t pin,r0,r1,r2;
 	int value;
@@ -40,6 +47,7 @@ void INPUT_74HC4051::loop() {
 		digitalWrite(_s0, r0);
 		digitalWrite(_s1, r1);
 		digitalWrite(_s2, r2);
+		//not sure if nessesary
 		//delayMicroseconds(10);
 		value = analogRead(_analog);
 		if (_value[pin] < value - INPUT_74HC4051_TOLERANCE || _value[pin] > value + INPUT_74HC4051_TOLERANCE) {
@@ -49,6 +57,7 @@ void INPUT_74HC4051::loop() {
 	}  	
 }
 
+//maybe useful later
 int INPUT_74HC4051::getSpecificValue(uint8_t pin) {
 	if (pin >= 8)
 		return -1;

source/libraries/INPUT_74HC4051/INPUT_74HC4051.h

@@ -1,5 +1,8 @@
 /*
-  INPUT_4051.h - Library for reading inputs from 4051 multiplexer
+	INPUT_72HC4051.h - Library for reading inputs from 74HC4051 multiplexer
+
+	library is for specialiced use: all I/O ports are used as analog inputs, values are stored and a callback function is called, when a value changes
+  
 */
 #ifndef INPUT_74HC4051_h
 #define INPUT_74HC4051_h

source/libraries/INPUT_MCP23017/INPUT_MCP23017.cpp

@@ -12,7 +12,7 @@ void INPUT_MCP23017::begin(uint8_t addr,CallbackFunction cbF) {
 	
 	_callbackFunction = cbF;
 		
-	// set defaults!
+	//set all ports as inputs
 	Wire.beginTransmission(MCP23017_ADDRESS | _addr);
 	Wire.write((byte)MCP23017_IODIRA);
 	Wire.write(0xFF);  // all inputs on port A
@@ -23,7 +23,7 @@ void INPUT_MCP23017::begin(uint8_t addr,CallbackFunction cbF) {
 	Wire.write(0xFF);  // all inputs on port B
 	Wire.endTransmission();
 	
-	
+	//activate pullup resistors
 	Wire.beginTransmission(MCP23017_ADDRESS | _addr);
 	Wire.write(MCP23017_GPPUA); 
 	Wire.write(0xFF);	// all pullup resistors on port A
@@ -34,6 +34,7 @@ void INPUT_MCP23017::begin(uint8_t addr,CallbackFunction cbF) {
 	Wire.write(0xFF);	// all pullup resistors on port B
 	Wire.endTransmission();
 
+	//inverse all inputs
 	Wire.beginTransmission(MCP23017_ADDRESS | _addr);
 	Wire.write((byte)MCP23017_IPOLA);
 	Wire.write(0xFF);  // inverse all inputs
@@ -95,6 +96,7 @@ void INPUT_MCP23017::loop() {
 	} 
 }
 
+//maybe useful later
 int INPUT_MCP23017::getSpecificValue(uint8_t pin) {
 	if (pin > 16)
 		return LOW;

source/libraries/INPUT_MCP23017/INPUT_MCP23017.h

@@ -1,5 +1,9 @@
 /*
 	INPUT_MCP23017.h - Library for reading inputs from MCP23017 port Expander
+
+	library is for specialiced use: all I/O ports are used as digital inputs with internal pullup resistor active, values are stored and a callback function is called, when a value changes
+  
+*/
 */
 #ifndef INPUT_MCP23017_h
 #define INPUT_MCP23017_h